We are looking for experienced welders who have experience in the PP (polypropylene) or PE (polyethylene) - welding of plastic pipes and installation of manholes in tranches. Most of the work is done outside, welding and laying pipes in ditches - as the escalator is filling after them. In the pipes it is either sewage dirt or water.

There will be used both mirror welding and electrofusion pipe welding procedure. The electrofusion (EF) technique is mainly used for welding pipes made from PE, for the water and gas utilities, although PP and PVDF can also be EF welded. This technique permits joining of pre-assembled pipes and fittings to be carried out with minimum equipment. It also offers a number of practical advantages to the installer; it is easy to use for repairs and where the available space and pipe movement is limited. The EF welding process involves the use of a fitting, which is basically an outer sleeve with a coil of electrical resistance wire at the bore, which the two pipe ends slide into. An internal stop prevents the pipe ends from meeting. Before welding, the pipe ends are cut square, the pipe surfaces to be joined are scraped to reveal uncontaminated material and the pipes are clamped to eliminate movement between the pipes and fitting. The welding process, where a current is passed through the coil to heat it to a temperature above the melting point of the surrounding polymer, can be divided into three stages: i) initial heating and fitting expansion, ii) heat soak to create the joint and finally iii) joint cooling. The duration of stages i) and ii) is commonly termed the 'fusion time'

- must be familiar with:

• Mirror welding (fusion):  <<<Click here>>> to see a sample video about mirror welding procedure
  
• Electro sleeve welding (fusion):  <<<Click here>>> to see a sample video about this electro sleeve welding procedure. 

- good physical condition is needed (they will sometimes face difficult weather conditions)
- relevant certificates and driver license
- English knowledge: at least B1 (intermediate level)

Long-time contracts for the right person: at least 6 months - 1 year. The flight expenses (a two-way tickets) are covered by the employer but will be deducted at the salary. Accommodation is also provided. You will have the chance to work at a very respected company in Norway, that recruits many Romanian workers!